Product features:

1. Effective shielding:2G/3G/4G/5Gmobile phoneand2.4G（WLAN/WIFI/Bluetooth 5.8G (optional) and other wireless communication signals.

2. The equipment adopts high-density technologyEfficient cooling and heat dissipation system composed of heat sinks, 3 low-noise fans, and chassisStable, safe, and reliable performance.

3. The device is equipped with a high gain directional antenna, which emits interference electromagnetic signals in a conical shape in front of the device during operation. Installing and using it in a back or side to side direction can achieve no interference to the base station.

4The equipment can be equipped with a built-in network control board and data interface RJ45 according to user needs, supporting TCP/IP protocol, LAN connection and Internet connection. By manipulating software to remotely control and manage the on/off, timed on/off, selective on/off, etc. of each device, monitor the connection and working status of each device, report in real-time, and achieveQuery and management of IP address and working status of system equipmentAccording to the plan, unmanned control management can be achieved.

5. Plug and play, turn on the switch, easy to install and use; Slow start circuit design to avoid mechanical switch ignition phenomenon.

Technical parameters:

Instructions for use:

1. Hang the device wall in the middle of any wall on the left and right sides of the usage area, or place it upright on a tableThe optimal installation height is1.5~2.2Rice.

2. Connect the power adapter and power cord, insert the power cord plug into the mains socket, turn on the power switch on the power adapter, and the working indicator light on the side of the device will light up to indicate that it is starting to work.

The size of the equipment shielding range depends on the electromagnetic field strength of the usage site. The closer the communication base station is to the usage site, the smaller the equipment shielding range, and vice versa. When there is a communication base station near the place of use or the area is larger than the effective shielding range of the equipment, it is recommended to install multiple devices in a cellular manner to ensure the shielding effect.

Notes:

1. The equipment should not be placed flat for use, installed in a position that is too low or too highHigh will affect the shielding effect.

2. When installing and using, the power adapter should be placed below or on the side of the device to prevent interference with the power adapter during device startup and unstable operation.

3. The equipment has reached its normal operating rangeRSSI of electromagnetic field strength in the place of use≤ -75dBm, RSRP ≤ -95dBmOtherwise, it may result in a reduced shielding range or incomplete shielding.

4. When using, pay attention to selecting the correct installation position of the equipment to achieve the best shielding effect.

5. The equipment must be placed in a well ventilated area, avoiding obstacles, strong heat sources, and strong electromagnetic sources to ensure long-term stability of the equipment's performance.

6.When the device is not in use,Power should be cut off in a timely manner,To avoid affecting the normal use of mobile phones and other wireless communication tools.

7.When installing equipment for outdoor use, attention should be paid to waterproofing; Please stay away from corrosive gases and liquids,And do a good job in dust prevention.